 |
Never smoke or have open flame or spark near a battery. |
|
Always wear personal safety wear when inspecting, servicing or working near batteries. |
|
Always maintain correct electrolyte levels as specified. |
|
Always maintain batteries in clean and dry condition. |
|
Always insure no metal objects come into contact with the battery. |
|
Always add distilled or approved water only. If spill-overs occur, contact battery expert for service. |
|
Discharge batteries no more than 80% of their rated capacity. Ideal discharge/charge parameters are 6 hours use, 8 hours charge and 4 hours cool-down prior to use. |
|
Never place a hot battery on-charge or in operation. If battery is hot (+115F), contact battery expert for inspection. |
|
Always perform and record electrolyte and cell voltage readings on a minimum quarterly basis on each 75 discharge cycles. |
|
Remove or open all covers from batteries during charge, insure adequate ventilation exists in all areas where batteries are being charged. |
| Click here to download the PDF version |
