BBI Battery Chargers
|
|
| Features include: |
 |
- Fully integrated microprocessor control for automatic dv/dt di/dt termination
- Interface jack for remote control and monitoring options
- Automatic refresh charge every twelve hours
- Charge time of eight hours or less on a normally discharged battery
- Auto start with five second delay
- Selectable delayed start from one to nine hours
- Battery protection with override timers, wrong battery sensing and negative charge slope termination
- Automatic shutdown for the following conditions
- 80% charge does not occur in nine hours or;
- Final charge is not reached six hours after 80% (gassing point)
- Volts per cell are too high or too low
- Charging current is too low
- Battery cable is disconnected while charging
CAUTION: DISCONNECTING THE BATTERY FROM THE CHARGER DURING THE CHARGE CYCLE WITHOUT MANUALLY STOPPING THE CHARGER CAN CAUSE DAMAGE TO BOTH OPERATORS AND EQUIPMENT AND VOID THE WARRANTY
- Ferroresonant tapered charge for optimum battery and charger life
- Selectable 80% voltage of 2.37 or 2.45 volts per cell
- Four position Digital display for showing;
- Charge current
- Equalize in process
- Fault diagnostics
- Four LED indicators showing charge status including
- Charging
- 80% Charged
- Charge Complete
- Fault Shutdown
- Red push button for manual shutdown
- Manual jump start for over-discharged batteries
- Manual and or Automatic equalization
- Ten foot long output cables for added flexibility
- Numerous Output connectors available as standard
Product Safety
- UL Listed
- UL Listed to Canadian Safety Standards
Optional Features
- Wall Mount brackets available
- Remote Control Box available
- Fungus protection available
 |
|
|
|
|
|
|
